Description

Product sellpoints

1.Easy Installation:Simple setup with AUX input; place the speaker on a flat aluminum surface for optimal bass resonance.
2.Versatile Audio Modes:Features standard, extra bass, and stereo sound modes to tailor your audio experience to your 3.preference.
4.Durable Metal Cabinet:Constructed with a sturdy metal cabinet, this speaker withstands the test of time and use.
5.Portable Design:Lightweight at just 600g, this portable sounderlink speaker is easy to transport for on-the-go entertainment.
6. Vibration Speaker|High Power Output:Delivers a robust 100W of power, ensuring deep, resonating bass for a dynamic audio experience.
Specifications SPEC DESCRIPTION 75mmMM resonance 4Ω50W
CUSTOMER
MODEL
NO.		 CUSTOMER’S NO.
SAMPLE’S NO. VB-75MM
NO Item Speficications Test conditions
1 RATED IMPEDANCE 3.6Ω±15 % AT 1M 1 V96Hz
2 BOTTOMING TEST MUSTBENORMAL SINEWAVE10V,ATFO-15KHz
3 SWEEP TEST MUSTBENORMAL SINEWAVE10V,ATFO-15KHz
4 RESONANTFREQ.(fo) 355±20 %Hz WITHOUT BAFFLE
5 Sensitivity OUTPUT S.P.L. MEANVALUE AT83±3dB ,500,600,800,1000 HZ AT1W ON AXIS CALCULATED
FROM 1M MEASUREMENT
6 FREQ.RESPONSE FO ～13K HzOUTPUT S.P.L. +. –10 dB
7 RATED PREQ.RANGE FO ～13K HzOUTPUT MAX.DEVIATION10 dB.
8 RETED.POWER INPUT 40W SINE WAVEPROGRAM SIGNAL
9 50W
MAX. POWER INPUT
10 Load consitant AFTER TEST. MEET PINK
NOISE3 W72HOURS
LOAD TEST ITEM 2,&3.
11 Heat resistant test AFTER TEST. MEET 70±2°C 20-50% RH48HOURS
HEAT TEST ITEM 2,&3.
12 huimd test AFTER TEST. MEET 40±2°C90-95% R.H48HOURS
HUMIDITY TEST ITEM 2,&3.
13 magnetic strongless 9000 ± 10％GAUSS
FLUX. DENSITY
14 Magnetic Major magnetic Φ38.5*8MATERIALOZ
SIZE secondary magnetic Φ 35.5*4MATERIAL OZ
15 Vas: /±30% DCR:4Ω

Net weight: 600 g/pcs

Install instruction:

Just connet the wire to the amplified audio signal. Make sure to put falt aluminum on a plain surface. The sound，especially the bass sound will be generated by the resonance of the speaker and the surface， such as a wooden table.

Mace sure the flat aluminum panel face down in a vertical way.

Turn on the amplifier form small to large, and stop if you can get a good sound quality and low distortion. To avoid to load the amplifier to the maximum volume directly.